Zero Waste Coffee roasting pails 30 litre gold with two handles and vent hole

The Golden Zero Waste roasting buckets, specially developed for coffee roasting, are manufactured in Austria from tinplate and finished with a protective gold coating. The high-quality metal pails can be used as sustainable metal packaging for degassing and storing coffee during and after the roasting process, as well as packaging for selling. Approximately 9 - 12 kg of coffee beans can be stored in these eco-friendly containers. The lid of the roasting bucket with Zero Waste embossing is equipped with a vent hole / pressure relief hole to prevent excess pressure during coffee degassing. The included valves, in combination with the valve fluid, ensure aroma protection and protect against the ingress of dirt and foreign particles.

• The coffee roasting pails are sustainably produced in Austria from metal/tinplate.
• Metal packaging made of tinplate is 100% recyclable if disposed of properly.
• The metal bucket is food safe and BPA-NI (BPA non-intent).
• The food pail is inside and outside double BPA-NI gold protective lacquered with seam coverage.
• The robust pail is unbreakable and impermeable to light and air.
• The golden roasting pail is delivered inclusive aroma protection vent valve, lid with zero waste embossing and 3 mm vent hole, latch ring light and metal transport safety splint (reusable). The valve fluid is required for the vent valves to achieve the desired function. It can be ordered separately and is sufficient for at least 100 valves. Using a latch ring, the metal bucket is firmly attached to its lid. The clamping ring is locked in clockwise direction. The latch ring can additionally be secured with a safety splint for transport.
• The hobbock is equipped with two metal carrying handles on the sides.
• Stackable (conical shape) for space-saving storage.
• Optimal emptying is achieved by the large opening and the ringless, thin bucket edge.
• Containers made of tinplate are not suitable for water-containing filling goods or moist storage/handling. Contact with water or moisture lead to rust.
• Metal pail without approval for dangerous goods.
• Can be used several times if handled properly.

Instructions for use: Shake the valve fluid well before use. Put the valves tape down with the valve side. Apply 1 small drop left and right outside onto the punched-out contours. After 5 minutes resting period, remove the excessive fluid of the valve. Press the valve briefly and firmly with the punched-out contours above the vent hole on the pail lid. Using a latch ring, the metal bucket is firmly attached to its lid. The clamping ring is locked in clockwise direction. The latch ring can additionally be secured with a safety splint for transport.

Due to the different fillings on the market and their individual composition, we cannot confirm absolute suitability for respective fillings. It is the responsibility of the user/bottler of the packaging to determine and confirm the suitability for the respective filling in advance. The actual suitability of the chosen packaging can only be properly ascertained by performing your own preliminary tests. The specified range of use for this article represents a rough classification based on the legal requirements.