The coffee roasting bucket was specially developed for coffee roasting and can be used as sustainable metal packaging for venting and storing coffee during and after the roasting process, as well as for selling coffee. The lid of the roasting bucket with zero waste embossing is equipped with a vent hole / overpressure hole to avoid overpressure when outgassing coffee. The included valves, together with the valve fluid, provide aroma protection and protection against entry of dirt and foreign particles.
- The coffee roasting pails are sustainably produced in Austria from metal/tinplate.
- Metal packaging made of tinplate is 100% recyclable if disposed of properly.
- The metal bucket is food safe and BPA-NI (BPA non-intent).
- The Zero Waste coffee roasting bucket is inside BPA-NI protective gold and outside BPA-NI protective lacquered.
- The robust pail is unbreakable and impermeable to light and air.
- Stackable (conical shape) for space-saving storage.
- Optimal emptying is achieved by the large opening and the ringless, thin bucket edge.
- The hobbock is equipped with a metal carrying handle.
- This roasting pail is delivered inclusive aroma protection vent valve, lid with zero waste embossing and 3 mm vent hole, latch ring light and metal transport safety splint (reusable). Using a latch ring, the metal bucket is firmly attached to its lid. The clamping ring is locked in clockwise direction. The latch ring can additionally be secured with a safety splint for transport.
- The valve fluid is required for the vent valves ito achieve the desired function. It can be ordered separately and is sufficient for at least 100 valves.
- Containers made of tinplate are not suitable for water-containing filling goods or moist storage/handling. Contact with water or moisture lead to rust.
- Hobbock without approval for dangerous goods.
- Can be used several times if handled properly.
Instructions for use: Shake the valve fluid well before use. Put the valves tape down with the valve side. Apply 1 small drop left and right outside onto the punched-out contours. After 5 minutes resting period, remove the excessive fluid of the valve. Press the valve briefly and firmly with the punched-out contours above the vent hole on the pail lid. Using a latch ring, the metal bucket is firmly attached to its lid.
The clamping ring is locked in clockwise direction. The latch ring can additionally be secured with a safety splint for transport.
The roasting pail will only be delivered with the specified accessories (icon images). Due to the different fillings on the market and their individual composition, we cannot confirm absolute suitability for respective fillings. It is the responsibility of the user/bottler of the packaging to determine and confirm the suitability for the respective filling in advance. The actual suitability of the chosen packaging can only be properly ascertained by performing your own preliminary tests. The specified range of use for this article represents a rough classification based on the legal requirements.
