Categories
You are here: crafts & modelling tin bottles

Tin bottle 1.000 ml with brush

D=108mm/H=132mm. Tin bottle 1000 ml made of tinplate, inside and outside blank. Inclusive closure with integrated brush. NOT CERTIFIED for dangerous goods!

Art.No.: 112108132A1PI

ab 1,59 € *

Packing Unit Amount / Packing Unit Price per piece Price / Packing Unit
Packet 66 1,99 € * 131,51 € *
Pallet 560 1,59 € * 892,66 € *
Features:  
Volume: 1.000 ml
Diameter: 108 mm
Height: 132 mm
Dia. opening: 42 mm
Inside lacquering: no
Outside lacquering: no
Stackable: no
Approval for dangerous goods: no

Other features:

Cylindrical Tin bottles/ Flat-top bottles made of tinplate inclusive closures with integrated brushes - Easy and clean application of spreadable fillings like glue or grease. The metal bottles are used in the chemical-technical industry as well as in the food industry: for alcohol as well as thin fluid solvent-based filling products (VOC), but also brake fluids, engine oils, thinners, hardeners, glazes and cooking oils.

  • All Tin bottles are made of tinplate (tinned sheet steel). Cans made of tinplate without an appropriate inside coating are not suitable for water-containing filling goods or moist storage/handling. Contact with water or moisture can lead to rust.

  • The Tin bottles are inside and outside blank.
  • All Tin bottles are suitable for food.
  • The Tin bottles are delivered with black 42 mm closures with integrated brushes (without child-proof look, without tamper-evident seal).
  • The closures will be pushed in after filling, either by hand or machine.
  • The brush protrudes a total of 120 mm into the can. The length of brush hairs is 30 mm.
  • After pressing in the closures our Tin bottles ensure optimal residual emptying and reclosability through the screwtop on the closure.

  • Tin bottles WITHOUT approval for dangerous goods!


Due to the different fillings on the market and their individual composition, we cannot confirm absolute suitability for respective fillings. It is the responsibility of the user/bottler of the packaging to determine and confirm the suitability for the respective filling in advance.

The actual suitability of the chosen packaging can only be properly ascertained by performing your own preliminary tests! The specified range of use for this article represent a rough classification based on the legal requirements!