You are here: crafts & modelling Canisters

Canisters 6 litre UN

L=164mm/W=125mm/H=352mm. Canisters 6 litre made of tinplate, inside and outside blank. UN-Approval for dangerous goods! Inclusive pull-out spout closure with tamper-evident seal, optionally with child-proof lock.

Art.No.: 13800004
Art.No. (old): 518005

ab 3,65 € *

Packing Unit Amount / Packing Unit Price per piece Price / Packing Unit
Pallet 126 3,65 € * 460,13 € *
Pull-out spout closure 42 mm red
Pull-out spout closure 42 mm red child-proof lock
Volume: 6.000 ml
Diameter: 164/125 mm
Height: 352 mm
Dia. opening: 42 mm
Inside lacquering: no
Outside laquering: no
Stackable: yes
Approval for dangerous goods: yes, UN-certified

Canisters made of tinplate – Metal packaging with UN-Approval for dangerous goods! The rectangular metal canisters are used in the chemical-technical industry as well as in the food industry: for alcohol as well as thin fluid solvent-based filling products (VOC), but also liquid hazardous goods, brake fluids, polish, cleaning supplies, engine oils, thinners, hardeners, paint, varnish, glazes and cooking oils.

  • All Canisters are made of tinplate (tinned sheet steel). Canisters made of tinplate without an appropriate inside coating are not suitable for water-containing filling goods or moist storage/handling. Contact with water or moisture can lead to rust.

  • The Canisters are inside and outside blank.
  • The Canisters are delivered with extricable red 42 mm pull-out spout closures with tamper-evident seal, optionally also available with child-proof lock.
  • The spout closures will be pushed in after filling, either by hand or machine.
  • After pressing in the spout closures our Canisters ensure optimal residual emptying and reclosability through the screwtop on the closure.
  • Canister with red, foldable carrying handle made of plastic on the top side.
  • The canisters are stackable and through their rectangular shape space-saving during storage and transport.

  • Canisters with UN-Approval for hazardous/dangerous goods UN 3A1/Y/170/...

 (Number embossed on the container)!

Due to the different fillings on the market and their individual composition, we cannot confirm absolute suitability for respective fillings. It is the responsibility of the user/bottler of the packaging to determine and confirm the suitability for the respective filling in advance.

The actual suitability of the chosen packaging can only be properly ascertained by performing your own preliminary tests! The specified range of use for this article represent a rough classification based on the legal requirements!