Categories
You are here: METAL Cylindrical drums

Cylindrical Container 30 litre UN

Cylindrical Container 30 litre UN

D1=310mm/D2=328mm/H=425mm. Cylindrical Metal Container 30 litre made of tinplate, inside and outside blank. UN-Approval for dangerous goods! Inclusive pull-out spout closure with tamper-evident seal.

Art.No.: 13400002
Art.No. (old): 512015

more Ask a question
ab 11,98 € *

Packing Unit Amount / Packing Unit Price per piece Price / Packing Unit
Pallet 45 11,98 € * 539,20 € *
Features:
Volume: 30.000 ml
Diameter 1.: 310 mm
Diameter 2.: 328 mm
Height: 425 mm
Dia. opening: 57 mm
Inside lacquering: no
Outside lacquering: no
Stackable: yes
Approval for dangerous goods: yes, UN-certified
Food safe: no

Other features:

Cylindrical Containers made of tinplate - Metal packaging with UN-Approval for dangerous goods! Our versatile, robust Cylindrical Containers are used in the chemical-technical industry: for alcohol as well as thin fluid solvent-based filling products (VOC), but also liquid hazardous goods, glue, brake fluids, polish, cleaning supplies, engine oils, thinners, hardeners and glazes.

  • The Cylindrical Containers are inside and outside blank.

  • The Cylindrical Containers are delivered with extricable red 57 mm pull-out spout closures with tamper-evident seal.
  • The spout closures will be pushed in after filling, either by hand or machine.
  • After pressing in the spout closures our Cylindrical Containers ensure optimal emptying and reclosability through the screwtop on the closure.

  • This Cylindrical Container is equipped with a two metal carrying handles on the side.
  • Our Cylindrical Containers are stackable.

  • All Cylindrical Containers are made of tinplate (tinned sheet steel). Containers made of tinplate without an appropriate inside coating are not suitable for water-containing filling goods or moist storage/handling. Contact with water or moisture can lead to rust.

  • Cylindrical Container with UN-Approval for hazardous/dangerous goods UN 1A1/Y/130/…

(Number embossed on the container)!

Due to the different fillings on the market and their individual composition, we cannot confirm absolute suitability for respective fillings. It is the responsibility of the user/bottler of the packaging to determine and confirm the suitability for the respective filling in advance.

The actual suitability of the chosen packaging can only be properly ascertained by performing your own preliminary tests! The specified range of use for this article represent a rough classification based on the legal requirements!